Author Topic: Aux fusebox (Read 177044 times)

bigpie · « **Reply #140 on:** January 05, 2015, 18:14:28 »

I'm making another batch up this week I'll pm you when I have them done.

Playsatan · « **Reply #141 on:** January 05, 2015, 23:38:24 »

Bigpie - can you recommend a crimping tool for the barrel style connections you're using? I'm using my standard crimper but it's not making a great job of it.

tallpaul · « **Reply #142 on:** January 06, 2015, 06:14:31 »

This is the crimp tool I use for non insulated terminals.
http://www.vehicle-wiring-products.eu/p ... rn-handles

bigpie · « **Reply #143 on:** January 06, 2015, 08:21:02 »

cheers TP

Playsatan · « **Reply #144 on:** January 06, 2015, 19:52:30 »

Thanks blokes.

Oop North John · « **Reply #145 on:** January 06, 2015, 20:03:03 »

Finally got one of those after many years of bodging connectors, well worth the low cost of it.

Locky · « **Reply #146 on:** January 06, 2015, 20:17:05 »

I've'e had the same crimping tool for many years, it makes it very easy and neat.

bigpie · « **Reply #147 on:** January 11, 2015, 10:18:22 »

I've made another batch up if anyone else wants one.

DesertStrom · « **Reply #148 on:** January 11, 2015, 12:47:32 »

Pm sent

bigpie · « **Reply #149 on:** January 11, 2015, 13:20:08 »

Replied

bigpie · « **Reply #150 on:** January 14, 2015, 18:45:11 »

FlyingPanMan, PM'd you. Need to know where to post it for you. Please let me know as soon as possible.

FlyingPanMan · « **Reply #151 on:** January 14, 2015, 22:06:24 »

Bigpie, I did pm back. Will try again.

bigpie · « **Reply #152 on:** January 15, 2015, 12:22:18 »

Got it this time will post on the way home. Been bringing it to work daily incase I got a reply.

FlyingPanMan · « **Reply #153 on:** January 17, 2015, 23:50:33 »

Got it yesterday morning. A very nice job with crimped and soldered connections of the proper motorcycle type. Great job, Thanks.

Paul.

skatrekker · « **Reply #154 on:** January 18, 2015, 12:47:58 »

Received with thanks, I will fit it on when I do the next upgrade, led indicators, dual output 12 lighter socket and repair cracked nose cone - picture will be posted then

bigpie · « **Reply #155 on:** January 18, 2015, 17:28:16 »

Great stuff. Got 4 of the current batch left and ready to go.

mr_diver · « **Reply #156 on:** January 18, 2015, 19:48:49 »

Being a smart arse and a tight arse, I thought I could use my GCSE in D&T Electronics to make myself a set of these.

Seriously... what it cost me in parts, time, solder, burns and the mrs complaining of the smell of flux in the living room I should have just bought the things from BigPie!

Took sodding ages to figure out a way to wire it neatly and the over an hour to make one, then another 2 hours to redo all the wiring on the bike to suit the new layout.

In the end you get a nice neat bit of kit... but god was it a PITA to make.
Quite robust base with a few mounting options.

How you can sit there with your little production line going is beyond me. 2 was enough for me to do in one lifetime.

bigpie · « **Reply #157 on:** January 18, 2015, 20:15:24 »

Got a bit of a system going, and I make at least 10 at a time, though it is a bit of a struggle to fit in my job, my software development business and making the electronic bits and bobs, general house duties, being a dad and trying get an allotment plot in to shape.

Luckily I struggle to be able to sit still and do nothing, but as we come out of winter I will be doing less of the electrical bits and bobs and I do hope that one day my software business can take over from the software job.

bigpie · « **Reply #158 on:** January 20, 2015, 09:01:37 »

2 left now.

Gassoon · « **Reply #159 on:** January 20, 2015, 10:35:44 »

Cheers bigpie