Author Topic: What have you done with your V-Strom today? (Read 1400331 times)

hotbulb · « **Reply #9340 on:** February 02, 2020, 09:16:58 »

Went to the Bristol Classic Bike show at Shepton Mallet yesterday......lots to see - and lots of people.
A good trip, but the wind was a bit hairy at times, particularly coming back home over the Second Severn Crossing.

JohnS · « **Reply #9341 on:** February 03, 2020, 17:31:56 »

Started it while standing on the left side to check the engine light gremlin had not returned. All was good so I lowered it onto the side stand. Which I had lifted!!!!!!!!!
Veeks are not that heavy after all!

Ianmc · « **Reply #9342 on:** February 03, 2020, 17:53:46 »

Stripped, cleaned and re-lubed the pins and bearings on the rear suspension linkage and re-assembled.It was all spot on with no discernible wear.Ready for some decent weather now.

hotbulb · « **Reply #9343 on:** February 04, 2020, 16:35:52 »

Flew through the MOT test today. Woo Hoo

Sage · « **Reply #9344 on:** February 04, 2020, 17:40:36 »

A quick 100 mile spin on dry roads today...have almost forgotten what they are like.

NeilM · « **Reply #9345 on:** February 04, 2020, 19:42:49 »

Took the whole gear linkage assembly to bits, cleaned it, re greased it and then adjusted the lever height.

I only wanted to adjust the gear level up a bit, but the threads were all pretty grubby and one thing led to another.

UK_Vstrom650 · « **Reply #9346 on:** February 04, 2020, 20:28:45 »

Quick clean and re-coating in ACF50 ready for a run to Liverpool tomorrow

NeilM · « **Reply #9347 on:** February 05, 2020, 16:07:51 »

Fitted a set of Givi E21 panniers I got for a bargain price. I then adjusted the rear suspension, took the adjuster knob off and cleaned the boss it sits on which, (like all the other bits of the bike the dealer did not reach with his jet wash) was absolutely black with road grime, as was the inside of the adjuster knob, road grime and sand... nasty. After that I got to grips with changing things on the display and then..... I took it to the garage, filled it with petrol and went out for an hours ride.

Barbel Mick · « **Reply #9348 on:** February 05, 2020, 20:23:00 »

While doing our 'big shop' this morning I was wondering how I was going to manage all the work that was lined up for me this afternoon,

when a text came through on the phone.......it was the answer to my concern........ Josh!!
He had got the afternoon off & was off out for a ride.
A nice run around north west Leicestershire calling in at a workshop he knows where I think I may have got an answer to my suspension queries, then on to the Triumph factory at Hinckley for a look around and of course, a piece of cake.

100 miles and the new tyres scrubbed in.

vstroman · « **Reply #9349 on:** February 05, 2020, 20:44:57 »

Anyone got any tips for freeing up a very stubborn centre stand? I suspect the road crap has got it all seized up, not easy cleaning underneath without a bike lift.

Barbel Mick · « **Reply #9350 on:** February 05, 2020, 21:03:54 »

I took mine off last year to clean, repaint and grease. Did it on the side stand without a lift, not too difficult until you try to put the springs back on.

If you just need a quick fix for now, spray liberally with WD40.

UK_Vstrom650 · « **Reply #9351 on:** February 05, 2020, 21:32:15 »

+1 on the WD40. After which use a load of lithium grease in the joints and work it in by moving the stand up and down. I'll be taking mine off in the Spring to clean it up and repaint so if I get around to doing it first I'll post any handy hints

mr_diver · « **Reply #9352 on:** February 06, 2020, 04:14:56 »

Put some strong string around the end of the spring (one at a time, inner first) put the string around one of the spokes (alu wheels only) of the rear wheel. And pull the string towards the front of the bike with one hand and guide the spring with the other hand.

You must lock the front brakes (I use tape around the front brake lever and bricks front and back)
Do it on the side stand with the centre stand held in the up position with a bungee so you can manoeuvre it if needed.

Either that or have a look on ebay for a spring puller.

Barbel Mick · « **Reply #9353 on:** February 06, 2020, 10:27:47 »

I tried the string method but couldn't manage it that way.
I used a big screwdriver and did it a similar way to this video. Took a few attempts but it did go eventually. As mr_diver says you do need to put the inner spring on first.

Stonec0ld · « **Reply #9354 on:** February 06, 2020, 19:13:43 »

Quote from: Barbel Mick on February 05, 2020, 21:03:54

I took mine off last year to clean, repaint and grease. Did it on the side stand without a lift, not too difficult until you try to put the springs back on.
If you just need a quick fix for now, spray liberally with WD40.

Is it worth a visit then? Thinking about taking a day off during the next couple of months before the new baby and wondering where to go.

timangus · « **Reply #9355 on:** February 07, 2020, 14:54:17 »

Had a pair of Bridgestone BT30’s fitted to my newly painted wheels. Once again great service and price from Ride In Tyres of Reading

Fat Rat · « **Reply #9356 on:** February 08, 2020, 13:05:43 »

Drained some really black stuff out and put some brown stuff in.

Fat Rat · « **Reply #9357 on:** February 08, 2020, 13:45:58 »

I think the last owner had his money's worth out of these rear pads

jabmotorsport · « **Reply #9358 on:** February 08, 2020, 13:52:53 »

Must have been a Yorkshireman

SuzukiSte · « **Reply #9359 on:** February 08, 2020, 17:17:23 »