tall seat 2016 vstrom 1000

[joeprobert]

hi , any tall seats for sale for a 2016 vstrom 1000 ?
thanks

[The Doctor 46]

I don't know which seat you have fitted at the moment but if you have a low seat and not tried the standard one, I think you will find the standard seat tall enough.

I had an operation a few months ago and a week or so later went for a short ride on my bike and found the standard seat too high and the stretch to the ground seemed much to far after the op. I bought a low seat off a nice chap on this site until I got over the op but have decided to keep it so, my standard seat could be for sale if you need it.

I am 6ft tall by the way and a few years ago owned a BMW GSA1150 with a tall seat and I loved it, I could see over most cars and I had more leg room but I'm sure I couldn't manage that now.

Anyway, if you have a low seat fitted now then I suggest you try the standard one before a high one. Hope this helps. 

[porter]

I use the tall seat, I find it much more comfortable than the standard seat, or a Sargent I had also. You do need to be tall though, I'm 6ft, wear 34 inside leg jeans( don't know the real measurement)  and I'm on tippy toes sometimes.

[joeprobert]

I've got a standard seat fitted and footpeg lowering kit , still a bit cramped , I'm 6.2
so really want a taller one . thanks for Replies so far .

[porter]

SW Motec adjustable footrests help also. In the standard position there slightly lower, maybe 10mm than the oe pegs and also more comfortable. They do adjust down another 15mm but your ground clearance goes to pot with lowering plates fitted also.
 I changed to the standard seat last week for the mot, in case the tester was short, did 150 mile after the test and it was agony.  Back to the tall seat asap!