« previous next »
Pages: [1]   Go Down

Author Topic: Front Sprocket change/Clutch Slave  (Read 470 times)

0 Members and 1 Guest are viewing this topic.

Offline geraldo

  • Member
  • ***
  • Joined: Jul 2013
  • Posts: 37
  • Bike: 2019 DL 1050, 2002 ZRX 1200S, 1995 ZXR 750L3
  • Location: Inverness
Front Sprocket change/Clutch Slave
« on: May 04, 2023, 19:20:56 »
Evening Folks, been changing sprockets, also fitted the Cosmo bashguard and the Cymarc Gear Change enhancer. All going well until..... did not notice when I printed the manual I managed to miss the bit about tying back the Clutch lever ...ffs. :groan: It was obvious something was amiss when I mounted the Clutch Slave and the lever only moved about an inch before going solid.
Anybody able to offer any advice, it would be greatly appreciated. :ty:
Cheers, Gerry.
Logged

Offline Gert

  • Member
  • ***
  • Joined: Sep 2015
  • Posts: 2364
  • Bike: DL650 K5 Blue, DL650 K6 Red
  • Location: South Africa
Re: Front Sprocket change/Clutch Slave
« Reply #1 on: May 05, 2023, 07:25:04 »
Have a look whether the advice offered in https://www.v-strom.co.uk/smf/index.php?topic=41955.0 may assist with your clutch slave problem.
Logged

Offline geraldo

  • Member
  • ***
  • Joined: Jul 2013
  • Posts: 37
  • Bike: 2019 DL 1050, 2002 ZRX 1200S, 1995 ZXR 750L3
  • Location: Inverness
Re: Front Sprocket change/Clutch Slave
« Reply #2 on: May 05, 2023, 17:06:51 »
Many Thanks Gert  :thumb:
Logged
Pages: [1]   Go Up
« previous next »