Author Topic: 650 2010  (Read 939 times)

0 Members and 1 Guest are viewing this topic.

Offline northern_southerner

  • Member
  • ***
  • Joined: Jun 2017
  • Posts: 15
  • Bike: DL650 L0
  • Location: Galway, Ireland
650 2010
« on: July 25, 2018, 19:58:24 »


The link above is the multimeter reading from my v strom. Last night I noticed neutral light flickering, then today it wouldn't start. Would you blokes agree my stator is daffy ducked? Thanks

Offline sjrainsford

  • Member
  • ***
  • Joined: Jul 2018
  • Posts: 251
  • Bike: DL650 L4 and 2008 Vespa GTS300 Super
  • Location: Staffordshire
Re: 650 2010
« Reply #1 on: July 26, 2018, 07:49:23 »
Yep, alternator or regulator.  Wiring has to be considered too.  Easy fixes are always nicer!

Offline northern_southerner

  • Member
  • ***
  • Joined: Jun 2017
  • Posts: 15
  • Bike: DL650 L0
  • Location: Galway, Ireland
Re: 650 2010
« Reply #2 on: July 26, 2018, 21:57:23 »
Cheers for reply mate
I checked the regulator and it tested good, I then tested the stator  and the first 2 test good but test that you run the bike and check current was bad on one of the connections.

Offline northern_southerner

  • Member
  • ***
  • Joined: Jun 2017
  • Posts: 15
  • Bike: DL650 L0
  • Location: Galway, Ireland
Re: 650 2010
« Reply #3 on: August 03, 2018, 21:47:13 »
Hello blokes, so I replaced my stator and started bike today, I got 12.2 when idling and 12.6 when 5000 rpm.
The rectifier tested OK when I checked it. could it be the battery? also a slight flicker in the side lights

thanks in advance

Offline northern_southerner

  • Member
  • ***
  • Joined: Jun 2017
  • Posts: 15
  • Bike: DL650 L0
  • Location: Galway, Ireland
Re: 650 2010
« Reply #4 on: August 04, 2018, 09:03:44 »
I ran the test of the 3 yellow wires from new stator, engine running at 4000 got 52 52 52.
tested rectifier  got   0 0 0 then 632 632 632 then 632 632 632 and 0 0 0 on the last wire.

battery held charge all night 13v
anyone any idea's