« previous next »
Pages: [1]   Go Down

Author Topic: F1 problem  (Read 1831 times)

0 Members and 1 Guest are viewing this topic.

Offline anmahi123

  • Member
  • ***
  • Joined: Jan 2015
  • Posts: 9
  • Bike: 650 K9 - 59 plate
  • Location: Norfolk
F1 problem
« on: August 14, 2016, 22:22:49 »
Hi blokes can any one help.
My V strom has a bit of an intermittent problem.
F1 fault has appeared on the dashboard. I have gone into dealer mode and fault code has come up C 64 which I have found out is an ignition fault. But this all I can find out.
Can anyone please help with info as to what I need to do / replace to cure the fault ?
Thanks
Logged

Offline greywolf

  • Member
  • ***
  • Joined: Dec 2011
  • Posts: 5262
  • Location: Evanston IL USA
Re: F1 problem
« Reply #1 on: August 14, 2016, 22:57:24 »
A C64 is an HO2 Sensor #1 Heater Circuit Malfunction

Check the oxygen sensor in the exhaust pipe and its associated wiring. Did you replace the exhaust by any chance?
Logged
Pat- 2007 DL650A was ridden to all 48 contiguous states. 2012 DL650A outlasted me.
Nicknames I use to lessen typing, Vee = 2002-2012 (K2-L2) DL1000s. Veek=2014+ (L4+) DL1000s. Wee = 2004-2011 (K4-L1) DL650s. Glee = 2012+ (L2+) DL650s

Offline anmahi123

  • Member
  • ***
  • Joined: Jan 2015
  • Posts: 9
  • Bike: 650 K9 - 59 plate
  • Location: Norfolk
Re: F1 problem
« Reply #2 on: August 15, 2016, 20:30:21 »
Hi.
Thanks for getting in touch.
No the exhaust has not been changed.
But have noted that just before F1 appears on screen both speedo needle and rev counter needle go completly over to right and back again as in the initial start up .
Logged
Pages: [1]   Go Up
« previous next »