« previous next »
Pages: [1]   Go Down

Author Topic: Front Brakes  (Read 604 times)

0 Members and 1 Guest are viewing this topic.

Offline dwc

  • Member
  • ***
  • Joined: Feb 2012
  • Posts: 87
Front Brakes
« on: January 13, 2013, 17:55:03 »
Good afternoon,
I cleaned up my front brakes over the weekend, and checked the pads with a view to changing them, they were fine.
However I have forgotten whether the pad retaining pin , once the cotter pin is removed, is pulled out or screwed out. If screwed what size socket is required?

Regards DWC
Logged

Offline greywolf

  • Member
  • ***
  • Joined: Dec 2011
  • Posts: 5262
  • Location: Evanston IL USA
Re: Front Brakes
« Reply #1 on: January 13, 2013, 18:31:15 »
It's pulled out, no threads.
Logged
Pat- 2007 DL650A was ridden to all 48 contiguous states. 2012 DL650A outlasted me.
Nicknames I use to lessen typing, Vee = 2002-2012 (K2-L2) DL1000s. Veek=2014+ (L4+) DL1000s. Wee = 2004-2011 (K4-L1) DL650s. Glee = 2012+ (L2+) DL650s

Offline dwc

  • Member
  • ***
  • Joined: Feb 2012
  • Posts: 87
Re: Front Brakes
« Reply #2 on: January 15, 2013, 17:40:54 »
Greywolf,

Many thanks. My memory must be going.

Regards DWC
Logged

Offline greywolf

  • Member
  • ***
  • Joined: Dec 2011
  • Posts: 5262
  • Location: Evanston IL USA
Re: Front Brakes
« Reply #3 on: January 15, 2013, 18:54:27 »
It's the rear caliper that has a threaded on pad retainer pin.
Logged
Pat- 2007 DL650A was ridden to all 48 contiguous states. 2012 DL650A outlasted me.
Nicknames I use to lessen typing, Vee = 2002-2012 (K2-L2) DL1000s. Veek=2014+ (L4+) DL1000s. Wee = 2004-2011 (K4-L1) DL650s. Glee = 2012+ (L2+) DL650s
Pages: [1]   Go Up
« previous next »