Author Topic: How to change side light bulbs on 08 v-Strom  (Read 837 times)

0 Members and 1 Guest are viewing this topic.

Offline Big E

  • Member
  • ***
  • Joined: Sep 2008
  • Posts: 95
How to change side light bulbs on 08 v-Strom
« on: April 05, 2020, 11:02:13 »
Hi can any one help ; change side light bulbs on o8 plate - do I need to take the front nose off ? 🤔🤔

Offline Fat Rat

  • Administrator
  • Member
  • *****
  • Joined: May 2008
  • Posts: 17543
  • Bloke/Geezer/Fella
  • Bike: DL650A L6, K8 DL1000 & Tenere 700
  • Location: Carmarthenshire, West Wales
Re: How to change side light bulbs on 08 v-Strom
« Reply #1 on: April 05, 2020, 11:06:34 »
You can get your hands in, just. Once you feel the rubber bulb holder, twist it anti-clockwise.  :thumb:

*** Bikers Campsite in West Wales ***



Learn to spell! There's a big difference between knowing your shit and knowing you're shit

Visit the V-Strom.co.uk shop today!

Offline Fat Rat

  • Administrator
  • Member
  • *****
  • Joined: May 2008
  • Posts: 17543
  • Bloke/Geezer/Fella
  • Bike: DL650A L6, K8 DL1000 & Tenere 700
  • Location: Carmarthenshire, West Wales
Re: How to change side light bulbs on 08 v-Strom
« Reply #2 on: April 05, 2020, 11:08:29 »
Once you do get it out, the short cable that comes from the rubber bulb holder goes into a plug, however, Suzuki very helpfully clip that down  :roll: If someone has been in there before you, they may have released that clip and left it unclipped which gives you a few more inches to play with...Oooer.
*** Bikers Campsite in West Wales ***



Learn to spell! There's a big difference between knowing your shit and knowing you're shit

Visit the V-Strom.co.uk shop today!

Offline Barbel Mick

  • Member
  • ***
  • Joined: Sep 2013
  • Posts: 5095
  • Bike: 800RE
  • Location: Derby
Re: How to change side light bulbs on 08 v-Strom
« Reply #3 on: April 05, 2020, 13:21:49 »
I know this is for the later model but it might give you an idea of what to look/feel for?
It's the two white connectors you want.  :thumb:
https://www.v-strom.co.uk/smf/index.php?topic=37739.0
Mick

Retired Breakfast Tester and semi professional tumbler.

Offline Gassoon

  • Quotes Museum Curator & Moderator
  • Member
  • ****
  • Joined: Jan 2010
  • Posts: 8182
  • Bike: DL650X L7
  • Location: Tyneside
Re: How to change side light bulbs on 08 v-Strom
« Reply #4 on: April 06, 2020, 12:42:58 »
I've not got big hands and even I had issues reaching into the area to remove them (and replace). Have a search on the forum for more tips eg https://www.v-strom.co.uk/smf/index.php?topic=6965.msg55341#msg55341

search under 'sidelight removal' or similar. There's also a big problem with bulbs dropping into the lens unit during the struggle to remove (or re-fit). I remember I cut a small panel with a stanley knife out of the black plastic, replaced the panel with some black ducktape, to easily fish out the dropped bulbs. I also lengthened the leads to the bulb holders.
"I am a dignified citizen of the area, not a fox-faced vagabond in an over-fancy hat!"

Work Experience Stasi


Offline sjrainsford

  • Member
  • ***
  • Joined: Jul 2018
  • Posts: 251
  • Bike: DL650 L4 and 2008 Vespa GTS300 Super
  • Location: Staffordshire
Re: How to change side light bulbs on 08 v-Strom
« Reply #5 on: April 08, 2020, 08:48:02 »
I had the same issue, had a bulb drop inside.  I taped a piece of hose to a vacuum and poked it through the headlamp and retrieved the bulb that way.  So the bulb stuck to the end of the hose.