Hello Lads,
So my 2010 Wee was giving some guff with the headlights going out and in, repaired the starter switch several times and cleaned the connector block left side of bike too, both resolved. But kept on giving problems.
So I got the beaver kit and installed that, perfect all works.
Prior to the beaver kit being installed my left front indicator was giving some issues, off alot but on rarely. (just the front left).
Once Beaver Kit was installed all indicators were lost, no left right or hazards. So I assumed the relay had gone.
This is where the not fun starts!
I decided to test some of the relay sections but I bridged the 12V Brown Positive to the Orange Yellow which seems to go to ignition. (according to wire diagram)
I've now lost my instrument cluster. The only thing showing is the clock, and the main headlight (blue LED) bulb. Everything else is blank. When turn on bike the arms of both counters go over and back as normal but I get nothing afterwards its like its dead.
Decided to pick a second hand at scrappers. And plug it in same scenario.
Any ideas what to check next? have I blown something where do I start. Head banging off a wall at this stage.