Author Topic: HELP needed.....Glee kickstand  (Read 6374 times)

0 Members and 1 Guest are viewing this topic.

Offline Little Thumper

  • Member
  • ***
  • Joined: Nov 2016
  • Posts: 36
  • Bike: DL650 (2015), CRF250 (2014)
Re: HELP needed.....Glee kickstand
« Reply #20 on: January 16, 2017, 15:01:23 »
Thanks for that.
I've had some other bits off Cosmo and have been very pleased with them.
I have contacted the dealer who sold me the bike to see if they have any thoughts about my cracked centre stand.
Not holding my breath though.

Love Will Tear Us Apart

Offline greywolf

  • Member
  • ***
  • Joined: Dec 2011
  • Posts: 5262
  • Location: Evanston IL USA
Re: HELP needed.....Glee kickstand
« Reply #21 on: January 16, 2017, 15:33:21 »
I can't imagine any help for a modified part that did not come with the bike from the factory.
Pat- 2007 DL650A was ridden to all 48 contiguous states. 2012 DL650A outlasted me.
Nicknames I use to lessen typing, Vee = 2002-2012 (K2-L2) DL1000s. Veek=2014+ (L4+) DL1000s. Wee = 2004-2011 (K4-L1) DL650s. Glee = 2012+ (L2+) DL650s

Offline Little Thumper

  • Member
  • ***
  • Joined: Nov 2016
  • Posts: 36
  • Bike: DL650 (2015), CRF250 (2014)
Re: HELP needed.....Glee kickstand
« Reply #22 on: January 16, 2017, 16:31:13 »
Well that is true.
But I believe that the dealer may well have modified the stand for the original owner, so I thought they might like to know in case they are contemplating doing the same mod for anyone else.
Love Will Tear Us Apart

Offline greywolf

  • Member
  • ***
  • Joined: Dec 2011
  • Posts: 5262
  • Location: Evanston IL USA
Re: HELP needed.....Glee kickstand
« Reply #23 on: January 16, 2017, 16:45:52 »
If the dealer modified the stand, that would be a different story. No dealer I ever had did any welding.
Pat- 2007 DL650A was ridden to all 48 contiguous states. 2012 DL650A outlasted me.
Nicknames I use to lessen typing, Vee = 2002-2012 (K2-L2) DL1000s. Veek=2014+ (L4+) DL1000s. Wee = 2004-2011 (K4-L1) DL650s. Glee = 2012+ (L2+) DL650s

Offline Little Thumper

  • Member
  • ***
  • Joined: Nov 2016
  • Posts: 36
  • Bike: DL650 (2015), CRF250 (2014)
Re: HELP needed.....Glee kickstand
« Reply #24 on: January 16, 2017, 17:24:50 »
Well, this dealer was in Scotland and the Scots are a pretty enterprising bunch!
I'm going to end up buying a new centre stand as I really don't want some welded up thing.
My current dog bones are 150mm c to c and I have sent for some 146 c to c ones.
I shall fit a new Cosmo centre stand and then see if I can get the side stand lengthened.
Have a nice day!
Ciao.
Love Will Tear Us Apart

Offline Little Thumper

  • Member
  • ***
  • Joined: Nov 2016
  • Posts: 36
  • Bike: DL650 (2015), CRF250 (2014)
Re: HELP needed.....Glee kickstand
« Reply #25 on: January 17, 2017, 17:55:52 »
The supplying dealer (Cupar Motorcycles) don't seem to want to reply to my email about my broken stand, so I assume that means that they won't be doing the customer service thing.
So, greywolf, I thought you were joking when you suggested using a hockey puck under the side stand but I notice on your other forum that it is a serious suggestion!
Anyway, I have just ordered a hockey puck off Fleabay and I shall let you know how I get on.
I'm sure I will get another verbal lashing for buying something that could be used in an American sport but DILLIGAF?
 :lala:
Love Will Tear Us Apart

Offline tallpaul

  • Member
  • ***
  • Joined: Dec 2013
  • Posts: 10385
  • Tastier than the Barrow-in-Furness bus depot...
  • Bike: 2016 Yamaha XT1200ZE
  • Location: Whitworth, Lancashire
Re: HELP needed.....Glee kickstand
« Reply #26 on: January 17, 2017, 20:03:10 »
lol lol

Sent using carrier pigeon...

Old enough to know better, but still too young to care...

Offline Rusty Nuts

  • Manufacturer of iron oxide
  • Member
  • ***
  • Joined: Jun 2012
  • Posts: 7968
  • Bike: KTM 1090 in orange, of course.
  • Location: Traitors Corner & West Yorkshire
Re: HELP needed.....Glee kickstand
« Reply #27 on: January 17, 2017, 20:30:57 »
Doesn't give a flying puck!


Might want to wait till the centre stand is fitted, to make sure the puck clears it when they are both retracted.

Offline Little Thumper

  • Member
  • ***
  • Joined: Nov 2016
  • Posts: 36
  • Bike: DL650 (2015), CRF250 (2014)
Re: HELP needed.....Glee kickstand
« Reply #28 on: January 18, 2017, 08:22:01 »
Rusty Nuts, that's far too logical,.
If the puck doesn't fit, then as it only cost me less than 3 quid, I'm sure I will be able to find some other use for it.
DILLIGAP?
 :)
Love Will Tear Us Apart

Offline Little Thumper

  • Member
  • ***
  • Joined: Nov 2016
  • Posts: 36
  • Bike: DL650 (2015), CRF250 (2014)
Re: HELP needed.....Glee kickstand
« Reply #29 on: January 21, 2017, 14:51:33 »
I had a really pleasant surprise today.
Cupar motorcycles who supplied my bike have kindly reimbursed me for the cost of my replacement centre stand.
They have turned out to be a great dealer despite my earlier misgivings and have gone the extra mile to sort out my little problems.
Hooray!
Love Will Tear Us Apart

Offline greywolf

  • Member
  • ***
  • Joined: Dec 2011
  • Posts: 5262
  • Location: Evanston IL USA
Re: HELP needed.....Glee kickstand
« Reply #30 on: January 21, 2017, 15:03:28 »
That is above and beyond the usual. That's a relationship to treasure.
Pat- 2007 DL650A was ridden to all 48 contiguous states. 2012 DL650A outlasted me.
Nicknames I use to lessen typing, Vee = 2002-2012 (K2-L2) DL1000s. Veek=2014+ (L4+) DL1000s. Wee = 2004-2011 (K4-L1) DL650s. Glee = 2012+ (L2+) DL650s

Offline Rusty Nuts

  • Manufacturer of iron oxide
  • Member
  • ***
  • Joined: Jun 2012
  • Posts: 7968
  • Bike: KTM 1090 in orange, of course.
  • Location: Traitors Corner & West Yorkshire
Re: HELP needed.....Glee kickstand
« Reply #31 on: January 21, 2017, 15:24:03 »
 :clap:  Much better than the usual "It was all right when it left our forecourt, sir."

Online UK_Vstrom650

  • Member
  • ***
  • Joined: Jun 2012
  • Posts: 6716
  • Bike: DL650A L2
Re: HELP needed.....Glee kickstand
« Reply #32 on: January 21, 2017, 20:06:54 »
Well done Cupar  :clap: