« previous next »
Pages: [1]   Go Down

Author Topic: Help  (Read 1295 times)

0 Members and 1 Guest are viewing this topic.

Offline pilky68

  • Member
  • ***
  • Joined: May 2013
  • Posts: 127
Help
« on: August 12, 2016, 15:44:54 »
Trying to change the small side light bulbs on my Glee.
Can't seem to get my fingers to them and don't want to start dismantling front end for two small LED bulbs.
Do they just pull out? Or do they twist?

Any tips?

.

Logged

Offline UK_Vstrom650

  • Member
  • ***
  • Joined: Jun 2012
  • Posts: 6715
  • Bike: DL650A L2
Re: Help
« Reply #1 on: August 12, 2016, 18:02:40 »
Twist... though I ended up taking the clocks off to get to them.

Also, the LEDS only lasted about 12 months then I had to replace them by removing the clocks again
Logged

Offline pilky68

  • Member
  • ***
  • Joined: May 2013
  • Posts: 127
Re: Help
« Reply #2 on: August 12, 2016, 18:18:21 »
Cheers
I'll give it another go.

.

Logged

Offline String

  • Member
  • ***
  • Joined: Mar 2016
  • Posts: 76
  • Bike: 650XT
  • Location: Sunderland
Re: Help
« Reply #3 on: August 12, 2016, 20:41:47 »
I'm currently having the same problem pilky. Wish my hands were a few sizes smaller and my fingers were 3 inches longer. Had a try a couple of weeks back with no success and as suggested by UK_Vstrom, some sort of dismantling is in order I fear ????
Logged
String.

Offline Fat Rat

  • Administrator
  • Member
  • *****
  • Joined: May 2008
  • Posts: 17542
  • Bloke/Geezer/Fella
  • Bike: DL650A L6, K8 DL1000 & Tenere 700
  • Location: Carmarthenshire, West Wales
Re: Help
« Reply #4 on: August 12, 2016, 20:45:20 »
Long nose Pliers sometimes help.
Logged
*** Bikers Campsite in West Wales ***



Learn to spell! There's a big difference between knowing your shit and knowing you're shit

Visit the V-Strom.co.uk shop today!

Offline pilky68

  • Member
  • ***
  • Joined: May 2013
  • Posts: 127
Re: Help
« Reply #5 on: August 12, 2016, 23:17:56 »
Done it with a twist.

.

Logged

Offline pilky68

  • Member
  • ***
  • Joined: May 2013
  • Posts: 127
Re: Help
« Reply #6 on: August 12, 2016, 23:18:48 »


.

Logged

Offline pilky68

  • Member
  • ***
  • Joined: May 2013
  • Posts: 127
Re: Help
« Reply #7 on: August 12, 2016, 23:20:01 »
Big improvement and less than 7 quid.
Yes I did both sides. Picture just for difference.

.

Logged

Offline BlackRockFox

  • Member
  • ***
  • Joined: Mar 2014
  • Posts: 299
  • Bike: DL650A XT M0
  • Location: West Sussex
Re: Help
« Reply #8 on: August 13, 2016, 08:10:22 »
It is very fiddly innit...took me way too long...frustration almost got the better of me  ###
Had to put tape around them as the fit was loose... :roll:

Changed the headlight bulbs at the same time...much easier [Extreme Vision 130]
(http://www.bikevis.com/motorcycle-bulb-upgrades/motorcycle-philips-extreme-vision-130-bulb-upgrade)

Yes, I changed all of them too  :)




Logged
Pages: [1]   Go Up
« previous next »