« previous next »
Pages: [1]   Go Down

Author Topic: Rev Counter problem  (Read 579 times)

0 Members and 1 Guest are viewing this topic.

Offline Ricky1000

  • Member
  • ***
  • Joined: Jun 2014
  • Posts: 60
Rev Counter problem
« on: July 26, 2014, 12:01:28 »
Was out yesterday for a run and noticed the rev counter take on a will of its own. Needle jumping up and down from zero to red line. Seems to start when speed is about 55mph and moving through gears. When at a steady speed and not useing gears appears to work normally.

Anyone had a similar problem. Could it be a bad connection if so where is the connection.
Logged
Keep her lit

Offline greywolf

  • Member
  • ***
  • Joined: Dec 2011
  • Posts: 5262
  • Location: Evanston IL USA
Re: Rev Counter problem
« Reply #1 on: July 26, 2014, 14:28:21 »
There is a large connector under a rubber cover in the left side of the fairing as well as the connection to the instrument case itself and the ECU.
Logged
Pat- 2007 DL650A was ridden to all 48 contiguous states. 2012 DL650A outlasted me.
Nicknames I use to lessen typing, Vee = 2002-2012 (K2-L2) DL1000s. Veek=2014+ (L4+) DL1000s. Wee = 2004-2011 (K4-L1) DL650s. Glee = 2012+ (L2+) DL650s

Offline Ricky1000

  • Member
  • ***
  • Joined: Jun 2014
  • Posts: 60
Re: Rev Counter problem
« Reply #2 on: July 26, 2014, 15:37:24 »
Spot on Greywolf. Big connector on the left cleaned reconnected problem sloved.

Thanks :)
Logged
Keep her lit
Pages: [1]   Go Up
« previous next »